THE DIRT NIGHTLY CLEANING NEVER REACHES.
Nightly crews work at arm height. Everything above and behind that line collects for months. Detail cleaning puts ledges, vents, diffusers, blinds, partitions, light fixtures, baseboards, and the space behind furniture on a rotation with a date attached.
- ABOVE
- REACH HEIGHT AND BEHIND IT
- QTRLY
- OR SEMIANNUAL ROTATIONS
- DATED
- EVERY AREA ON A CALENDAR
- PHOTO
- BEFORE AND AFTER ON FILE
DETAIL CLEANING / PROGRAMS + SCOPE
Deep work scheduled in zones so the building stays open.
Nobody shuts a floor down for a week. Detail work moves through the building in sections, wing by wing or floor by floor, so occupied space keeps running while crews finish behind them.
- *Quarterly
- +Zoned
- OKAfter-hours
32 detail tasks
Ledges, diffusers, blinds, partitions, fixtures, baseboards, vents, sills, and furniture undersides.
Set the rotation the building can actually absorb.
Every rotation is mapped to a zone calendar, photographed on completion, and signed off before the next zone opens.
- 01PRG-LIFT
Lift
Two per year
High dusting and vent work twice a year for buildings with low occupant density
- 02PRG-ROTATE
Rotate
Quarterly zones
The building divided into four zones with one zone fully detailed each quarter
- 03PRG-RESET
Reset
Single event
A one-time full building detail ahead of a tour, an audit, or a lease renewal
- 04PRG-CARRY
Carry
Bundled
Detail rotations folded into the nightly janitorial agreement at a blended monthly rate
WHAT THE SCOPE COVERS
A task list long enough to be worth scheduling.
Detail scopes are written as checkable lines with a height and a method. A crew either wiped the supply diffusers in the east wing or it did not, and the completion photo settles it without a debate.
HIGH WORK
Ceiling vents and supply diffusers
Light fixture housings and lenses
Wall ledges and door frame tops
Exposed ductwork and pipe runs
WINDOW LINE
Horizontal and vertical blind cleaning
Window sill and track detail
Interior glass partition polishing
Roller shade and valance dusting
LOW AND BEHIND
Baseboard and corner detail
Behind and beneath desks and files
Chair bases, casters, and table legs
Under-radiator and fin tube dusting
FIXED SURFACES
Restroom partition wipe down
Door hardware and kick plate polish
Wall spot cleaning and scuff removal
Vent grille and return air cover wash
Crews equipped for the reach the nightly team does not carry.
Warehouse and high-bay dust control
Lift-assisted cleaning of racking tops, beams, and fixture housings where accumulated dust becomes both a fire load and a product risk.
Clinics and patient-facing suites
Detail passes through exam rooms and waiting areas timed around patient schedules so no room is out of service during clinic hours.
Corporate headquarters and showrooms
Focused work on the surfaces visitors read first, including glass walls, millwork, feature lighting, and reception detail.
Stop waiting for a complaint to trigger the deep clean.
A posted rotation means the vents, blinds, and ledges get handled on a date instead of when a tenant finally mentions them.
COMPARE PROGRAMS->DETAIL CLEANING MANAGEMENT
PERIODIC WORK, ON A REAL CALENDAR.
Deep cleaning slides when nobody owns the date. Your facility manager builds the zone calendar, books the crew, confirms access and lift needs, and closes each zone with photos before the next one starts.
- 01
AUDIT THE BUILD
Ceiling heights, fixture counts, blind types, and access constraints are measured so the right equipment shows up.
- 02
ZONE THE CALENDAR
The building is split into rotation zones with dates set months ahead and shared with your tenants.
- 03
WORK THE LIST
Crews move task by task through the zone with lifts, extension tools, and containment where dust could travel.
- 04
CLOSE WITH PROOF
Each zone closes with completion photos, a signed task list, and any repair issues the crew spotted from height.
READY FOR A DETAIL CLEANING PROPOSAL?
SHOW US WHAT GETS SKIPPED.
Walk the building with your facility manager and get a zone calendar, a task list, and a per-rotation price.
- VENTS
- BLINDS
- LEDGES
- FIXTURES
- BASEBOARDS
- PARTITIONS